There are 2 types of labels, Direct Thermal Labels and Thermal Transfer Labels. Direct Thermal Labels do not require any ink, ribbons or cartridges. They are slightly more expensive to buy, less messy, easier to use and cheaper in the long run as you do not need a ribbon. Thermal Transfer labels on the other hand require a ribbon. The main difference between the two is that Thermal Transfer Labels can be exposed to UV (Direct Sunlight) where-as Direct Thermal Labels will fade out when exposed to direct sunlight for prolonged periods. Other factors to see when purchasing labels is the adhesive (Permanent or Removable, the latter being more expensive) and materials (Vinyl and polypropylene durable labels can withstand oils, water etc...).
Polypropylene labels, White, Permanent 105 x 74 mm Thermal Transfer (Requires Ribbon) - Reccomended to use with Resin Ribbons 1 inch (25.4 mm) core diameter 1000 labels on 1 roll
HEAT SHRINK TUBING is specifically designed for wire and cable marking. Once the tubing is printed simply slip it over the end of the (unterminated) cable and use a heat tool to shrink the tubing over the cable. May not be suitable for use on terminated cables (ie. if there is a connector on the end), and the tubing may not be large enough to fit over the connector. In that case consider self-laminating tape, or Vinyl / Nylon.
Identify and protect your wire and cables! Looking for a non-adhesive yet permanent solution to identify and protect your wire and cables at the same time? DYMO’s heat shrink polyolefin tubes provide clean and permanent marking for a wide range of cable diameters. These sleeves are applied before connection and can be permanently positioned after connection when shrunk with a heat-gun.
Features:
3:1 shrink ratio Conforms tightly to the wire when heat is applied Heat-shrinkable polyolefin Does not smudge or fade when printed. The legend remains legible even after exposure to abrasion,cleaning solvents or industrial fluids Flame retardant MIL-DTL-23053/5 classes 1 and 3
The Zebra 800011-140 YMCKO Colour Ribbon delivers exceptional print quality for vibrant, photo-like images and sharp text. It supports 100 card prints per roll and includes a cleaning roller for maintenance. Compatible with Zebra ZXP Series 1 printers, this ribbon ensures long-lasting, high-quality results.
Identify and protect your wire and cables! Looking for a non-adhesive yet permanent solution to identify and protect your wire and cables at the same time? DYMO’s heat shrink polyolefin tubes provide clean and permanent marking for a wide range of cable diameters. These sleeves are applied before connection and can be permanently positioned after connection when shrunk with a heat-gun.
Features:
3:1 shrink ratio Conforms tightly to the wire when heat is applied Heat-shrinkable polyolefin Does not smudge or fade when printed. The legend remains legible even after exposure to abrasion,cleaning solvents or industrial fluids Flame retardant MIL-DTL-23053/5 classes 1 and 3
The Zebra 800300-250EM YMCKO ribbon produces up to 200 high-quality prints per roll. Its vibrant color dye ensures photo-like images, while the black resin creates sharp text and barcodes. Compatible with Zebra ZC100 and ZC300 card printers, it includes a protective overlay panel for enhanced card durability.
Please note, this is the replacement for Zebra 800300-350 YMCKO ribbon.
The Zebra 800300-350EM YMCKO Ribbon is designed for high-quality, full-colour printing, offering up to 200 prints per roll. Compatible with ZC100 and ZC300 card printers, it uses yellow, magenta, cyan, black, and overlay panels to deliver vibrant images, sharp text, and durable cards.
** This Item has been replaced with 800300-250EM **
The Zebra 800033-840 YMCKO Ribbon is designed for full-colour printing with vibrant yellow, magenta, cyan, black, and a protective overlay. With a yield of 200 images per roll, it ensures high-quality prints on single or double-sided cards and is compatible with the Zebra ZXP Series 3 ID card printer. A cleaning roller is included.